Add to Cart
The item has been added
$77.00
Insta-Peg Refractory Material
Insta-Peg Refractory Material
4 X 12 cc Syringe
- SKU:
- Choose Options
- Availability:
- In Stock
Firing Support for Zirconia, e.max, and Porcelain Restorations
Insta-Peg Refractory Material allows technicians to quickly create stable support for crowns, veneers, and other ceramic restorations during the firing cycle. This custom peg putty can be applied directly to a firing peg, tray, or restoration and holds securely without slumping, expanding, or contaminating the restoration.
Compatible with zirconia, e.max, and other dental ceramics, Insta-Peg stabilizes restorations and allows for easy removal after the firing cycle using compressed air or a light twisting or plucking motion.
How Insta-Peg Is Commonly Used
With a Firing Peg
Insta-Peg is commonly used with a firing peg to support crowns, veneers, and other ceramic restorations during porcelain and glaze firing cycles. The material can be placed on the peg itself or inside the restoration before positioning it on the peg, creating stable support throughout the firing process.
Without a Firing Peg
In some situations, technicians choose to skip the firing peg entirely. Insta-Peg can be placed directly on a firing tray to support restorations such as veneers or other restorations that cannot be supported on pegs.
As a Handle
Insta-Peg can also be placed inside the interior of a crown or restoration to create a temporary handle. This makes it easier to position restorations during setup and remove them after the firing cycle is complete.
Why Choose Insta-Peg
Stable Ceramic Firing Support
Provides reliable support for crowns, veneers, and other ceramic restorations throughout porcelain and glaze firing cycles.
Ideal Handling Consistency
Not too thin. Not too thick. Insta-Peg shapes easily and stays where you put it.
No Dry Time Required
Unlike traditional peg putty materials, Insta-Peg can be placed directly into the furnace after application, eliminating waiting time and simplifying the firing workflow.
High-Temperature Stability
Remains stable during firing cycles up to 1300°C (2375°F) without slumping, expanding, or contaminating the restoration.
Clean Removal After Firing
Material removes easily using compressed air or a light twisting or plucking motion.
Additional Product Information
- Supplied as 4 syringes, 12 cc each
- Stable at temperatures up to 1300°C (2375°F)
- Compatible with zirconia, lithium disilicate (e.max), and other ceramic materials
- Available in blue or white
- Made in the USA
Resources
Insta-Peg Refractory Material SDS
Insta-Peg Refractory Material Instructions
Request a Free Sample
Technical Specifications
| Insta-Peg | |
| Syringe Capacity | 12 cc |
| Syringes Per Pack | 4 |
| Maximum Sustained Temp | 1300°C (2375°F) |
Insta-Peg Refractory Material FAQ
Can Insta-Peg be used with all types of ceramic restorations?
Yes, Insta-Peg Refractory Material works with zirconia, e.max, and other dental ceramic materials, providing stable and reliable support during the firing process.
Does Insta-Peg have to dry before firing?
No, Insta-Peg Refractory Material does not require drying and can be placed directly into the furnace, saving time and streamlining the process.
Do I have to use pegs with Insta-Peg?
No, you don’t have to use pegs with Insta-Peg. It can also be applied directly to the restoration or surface for stable support during firing.
How high of a temperature will Insta-Peg withstand?
Insta-Peg Refractory Material is stable at a sustained temperature of 1,300°C, providing reliable performance during ceramic firing.
How do I remove Insta-Peg after firing?
Insta-Peg Refractory Material can be removed by gently twisting the peg or pin and pulling it out. It can also be blown out with air or, if needed, removed with sandblasting.
What is the difference between blue and white Insta-Peg?
The only difference between the blue and white Insta-Peg is the color. Both versions have the same properties and performance.
Similar Products