When grinding Zircon or Titanium you need safe evacuation of water fog and dust, the Schick Benchtop Suction Tub & Separator Kit does just that. Indications for the Schick Dental Suction Tub and Separator include use on the bench top when grinding ceramics with a water cooled high speed turbine or when working with Titanium with a motor handpiece. The tub is safely kept on the bench with a holding tray and connects to the separator. The separator is then connected to your central or commercial suction unit. In both cases due to the increased health danger special care was taken for the total removal of the arising mill dust and cooling water with the use of a special separator unit.
When working with the turbine it is important to evacuate the water mist and milling dust due to the increased health hazard and the possibility of impairment of visibility by the water mist that is produced. In addition when working with the motor powered milling spindle to treat Titanium it is extremely important to remove the light grit that is created. With these concerns in mind Schick designed an extraction system that combats these hazards. The special tub is set on the bench and it contains the dust, water and particles with its special design, including the suction capabilities when connected to an extraction unit. The tub was designed to allow optimal extraction capabilities while still giving the user comfort and control while working. Schick then designed a special separator unit that is used in conjunction with any dust extractor. When working with the turbine the resulting grit and cooling water are transported through the suction tub, into the separator and then into the dust extractor. To stop any water from entering the dust extractor a special check valve was included in the design of the separator. This system stops the water from creating a messy work environment. The system can be operated by connecting the separator with all commercial or central suction systems.
This special set comes with the following
- Suction Tub (#2470)
- Extraction Separator Unit (#2655)
- Holding tray with non-slip feet (#2509)
|Bench Top Tub + Separator|
|Suction Tub Dimensions||300 mm X 125 mm X 245 mm|
|Suction Tub Weight||1.3 kg|
|Separator Dimensions||450 mm X 450 mm X 500 mm|
|Separator Weight||4.9 kg|
|Warranty||1 year warranty|