The #6642 Schick Replacement Chuck is a standard 2.35 mm size. This chuck fits the Schick Q Basic and C-Master Series handpieces, including the C1-Master, C2-Master and C3-Master.
User replacement is possible with the tools that came with your handpiece set. Users are cautioned to make sure to follow the instructions that can be found by viewing the PDF file below. If you do not have the chuck replacement tools you can purchase them from our site.
Please note that their is now only one chuck key option for the C1-Master, C2-Master and C3-Master. To remove and replace their chuck users will need the L Shaped Chuck Key (item no. 60819), and they will also need the Hold Fast Key (item no. 60840) to secure the motor while loosening or tightening the chuck.
This chuck is compatible with the following handpieces:
- Schick C1-Master
- Schick C2-Master
- Schick C3-Master
- Schick Q Basic
Just as your handpiece is designed to perform a specific function, the parts in a handpiece serve the critical function of helping keep the it in good operating condition. For example, each handpiece model requires a chuck that is manufactured to specific tolerances and specifications. The handpiece bearings are designed to keep the axle rotating at the highest levels of concentricity and insure a balanced handpiece. Using Genuine Schick Replacement Parts will help extend the life of your handpiece and are guaranteed to be compatible with your Schick manufactured handpiece.
If you have any questions about the replacement parts you may need for your handpiece please feel free to contact our repair department and we will be happy to help insure you get the proper items. We can be reached at 800.729.8192.
|Compatibility||Q Basic, C1-Master, C2-Master & C3-Master|
|Specifications||2.35 mm standard (Other sizes upon request)|
|Warranty||6 month warranty|