Diamond infused polishers for zirconia, lithium disilicate and other high-strength ceramics.
Only the highest-performing polishing instruments can take on the demands of the hardest ceramics. Vega Polishers are ideally suited for working with high-strength ceramics such as zirconia and lithium disilicate. Our polishers perform well in all kinds of tasks, from refining contacts and adjusting contours, to polishing to a high-shine. Possessing a high concentration of specially developed diamond grains, Vega Polishers perform at the highest level and leave an ultra-smooth surface behind.
Each of our distinct polishing grades has specific uses:
- Coarse Grit (Blue) – an aggressive diamond grain for making adjustments and pre-polishing, without needing additional pressure. (Zirconia, lithium disilicate, all-ceramic)
- Medium Grit (Red) – easily makes small adjustments and pre-polishes before final high-shine. (excellent for lithium disilicate). Smooths out and finesses the margins of full zirconia restorations.
- Fine Grit (Yellow) – delivers an ultra-smooth, high-luster finish (zirconia, lithium disilicate, high-strength ceramics)
These three choices in grit can depend upon technician preference, the type of job needed, or the type of material being used. Whatever shape or grit you choose you can be certain that Vega Polishers will run smooth, deliver extended durability and stay cool.
- Available in coarse, medium and fine
- All three grits are available in five different shapes
- Use with high-performance ceramics like zirconia and lithium disilicate
- Long-lasting, able to withstand wear and tear
- Runs stable, smooth and cool
- Infused with a high concentration of specially developed diamond grains
- Useful for variety of tasks: from small adjustments to high-shine
- Can serve as a second step, after our Arctic Grinders
- 104-HP shank size (2.35 mm)
- Sold individually
|Vega Polishers||Size||Optimal RPM||Maximum RPM|
|Knife-Edge||26 mm X 2 mm||6,000 rpm||20,000 rpm|
|Wheel||22 mm X 3.2 mm||6,000 rpm||20,000 rpm|
|Point||5.5 mm X 16 mm||15,000 rpm||20,000 rpm|
|Mounted Wheel||11.5 mm X 2.4 mm||6,000 rpm||20,000 rpm|
|Barrel||6 mm X 15 mm||15,000 rpm||20,000 rpm|
|Knife-Edge||Item no. 51300||Item no. 51330||Item no. 51360|
|Wheel||Item no. 51303||Item no. 51333||Item no. 51363|
|Point||Item no. 51306||Item no. 51336||Item no. 51366|
|Mounted Wheel||Item no. 51309||Item no. 51339||Item no. 51369|
|Barrel||Item no. 51312||Item no. 51342||Item no. 51372|